HOT PRODUCTS: Neutral detergent E061|

季小姐:18929127909 | 温小姐:18929120960

吴小姐:18025191157 | 张先生:18922975630

PA series of bottom water PA series of bottom water

PA series of bottom water...

PP Water Series PP Water Series

PP Water Series...

Water Series UV rework Water Series UV rework

Water Series UV rework...

UV Series metal bottom water UV Series metal bottom water

UV Series metal bottom water...

Cleaning agents series Cleaning agents series

Cleaning agents series...

UV metal surface and bottom water

UV metal surface and bottom water

Products

Product Description A metal surface UV at the end of aquatic features: UV metal surface and bottom water in a wide range of zinc alloy, magnesium alloy, stainless steel hardware and water, plastic vacuum plating or coating on the metal coating can be assisted to strengthen layer with a combination of UV, UV metal surface and bottom water at the same time most of the commonly used solvent-based resin has a good affinity, is a widely recognized to be a common market-type treatment agent.

Second, the metal surface of the UV end of aquatic features: 1, solid content: 50-60% 2, solution: yellow turbid liquid 3, softening temperature: 70 ℃ or so

Third, the metal surface and bottom water construction technology UV: 1, coating process: Hardware (PVD) coating the surface of the cleaning agent → → spraying dry for 3-5 minutes → UV Varnish → IR leveling (60 ± 10 ℃ × 4 ~ 6min) → UV curing (700 ± 100mj/cm2) → test, the next process. 2, the construction Viscosity: 8 ± 1 seconds (Iwata # 2 cup) working pressure :3-4Kg / cm2

Fourth, the metal surface and bottom water UV Packing: 4 L / cards 18 L / drum 25 kg / barrel.

Fifth, the metal surface and bottom water UV Note: 1, Avoid contact with eyes or skin, such as inadvertently stained, with plenty of water and soap and water, if necessary, seek immediate medical attention. 2, the product shelf life is 12 months, should be stored in a cool (30 ℃ or less) dark place, well-ventilated place away from sources of ignition. 3, bottom water on the metal surface after UV promptly sealed in order to avoid failure.
 

Previous |

Location:HOME >> UV Series metal bottom water

CopyRight 2011, All Rights Reserved TEL:0769-2242 6940 FAX:0769-2242 6941 EMAIL:dgnccy@163.com AliID:dgjiongsheng
MOB:Miss Ming:189 2912 0960 /Miss Qiu:180 2519 1157 / Miss Ji:189 2912 7909 Designed by L-KING